Calculate project costs and material budgets for your boat build.
Basic cruising sailboat
Luxury motor yacht
Traditional wooden boat
"My Boat Plans" is a collection of over 500 boat plans, from simple dinghies to larger cruisers. It includes step-by-step guides, video tutorials, and more.
Download NowRough material cost is the number that turns a dream into a plan, and DIY builders almost always underestimate it. A believable early estimate comes not from a hunch but from pricing the surface you must build and finishing, scaled for how you build and where you live.
This tool builds the estimate from the hull's surface area, then applies multipliers for construction method, complexity and regional pricing, and breaks the total into recognisable buckets such as hull stock, fasteners, hardware, systems and finishing so you can see where the money actually goes.
Enter length, beam, construction type, complexity and region, and the calculator returns a category breakdown, a subtotal and a contingency, plus a cost-per-foot figure you can benchmark against what similar boats really cost to build.
Surface Area = L × B × 2.5; Each category = rate × Area × multipliers; Total = Subtotal × (1 + contingency)| Method | Multiplier | Why |
|---|---|---|
| Wood / strip | 0.8 | Cheaper stock, more labour |
| Fiberglass | 1.0 | Baseline consumables |
| Steel | 1.2 | Plate, weld consumables |
| Aluminium | 1.4 | Costly marine alloy |
| Composite / carbon | 1.6 | Premium cores and fabrics |
Relative construction-method multipliers used in the estimate.
Formula verified against standard naval-architecture references · Updated October 2026
It varies enormously with size, method, finish and how much you already own, but a common planning figure for materials is a few hundred to a few thousand dollars per foot. A small plywood daysailer may come in very cheaply, while a finished composite cruiser can rival a production boat. This tool gives a rough early range from surface area and category rates; refine it with real quotes as soon as you have a cutting list and a systems plan.
Often not in pure dollars. A skilled builder with tools and time can save money, but after valuing your hundreds of hours, buying plans, jigs and one-off materials, the saving can evaporate, and the build takes years. The real rewards are the exact boat you want, the skills and the satisfaction. Do the maths with your labour priced in before assuming DIY is the cheap route.
Underestimating systems, hardware and finishing. Hull material is easy to price, but electrics, plumbing, steering, rigging, sails, paint and the endless small fittings creep upward and surprise builders. Track every category against the breakdown here, keep receipts, and hold the contingency intact until you truly need it.
Because the material you buy roughly scales with the surface you must build, fair and finish, this tool estimates it as length times beam times about 2.5, a factor that folds the wetted and topside skins into a workable figure. It is a rule of thumb, not a lofted measurement, but it lets you apply per-square-foot rates for each category consistently across designs.
Add 15 to 25 percent at minimum for a first project, more if the design is novel or your estimating is optimistic. Contingency covers price rises, mistakes, re-cuts, extra hardware and the items you have not thought of yet. Builders who skip it are the ones who stall halfway, so treat it as a real line in the budget rather than optional slack.
Treat them as sensible first-order guides, not quotes. Construction, complexity and region multipliers nudge a baseline toward reality, but local prices, your skill and your specific design can move the result a good deal. The best approach is to price your actual bill of materials once it exists and use this estimate to sanity-check that you have not left a whole category out.